Front Compartment Revealed
Unlocking the Front Panel
- Enter your combination — or the factory default, 000, if you haven't set a custom one.
- Push the slider toward the lock dials.
- The front panel unlocks and opens.
Laptop Pocket
Inserting & Securing Your Laptop
- Slide your laptop into the padded sleeve.
- Push it down as far as possible, and back so it sits behind the hinge — this lets the front panel close securely.
- Pull the strap down as tightly as possible to secure.
Tracking
Inserting an AirTag
- Unclip the press stud.
- Insert the AirTag, silver side facing out.
- Reclip to secure.
Easy-Reach Access
Retrieve Larger Items Quickly
Ideal for larger travel essentials — headphones, jumper, toiletries bag, etc.
- Partially unzip the laptop pocket.
- Reach in to grab your belongings.
Trunk-Style Packing
Set Up Trunk Access
- Stand the luggage upright, then unlock and open the front panel.
- Unclip the side gussets — two press studs on each side.
- Lay the luggage on its back.
- Unzip the laptop pocket.
- Lift the pocket and lean it against the interior of the front panel.
- Secure it in place by clipping it to the hanging press stud.
Full-Depth Packing
Using Trunk Access
- Open the luggage trunk-style.
- Unzip the liner to reach the compartment below (leave it open for full-depth packing).
- Unclip the compression straps if needed.
Slide Straps
Adjusting the Compression Straps
- Slide straps move to where you need them, allowing you to customise where and how you secure your belongings.
- Slide the vertical straps to the desired position.
- Pull the horizontal straps to tighten.
Increase fill capacity
Expand & Pack More
- Unzip the wraparound zipper fully.
- The gusset releases, expanding the case and increasing packing capacity by 7.5L.
- Zip closed again to return to standard size.
Essentials Nearby
Using the Back Pockets
- Gently pull apart the hook-and-loop closure to open the pocket.
- Slide in your phone, passport, or boarding pass, etc.
- Press the closure together to secure it.
Telescopic Handle
Adjusting the Handle Height
- Press and hold the button; extend the handle by pulling upwards.
- Extend fully until it stops.
- Press the button again and lower it to the desired height.
Integrated hanger
Using the Hanging Rail
- Locate the hanging bar on the lower section of the telescopic handle.
- Align your hanger's hook with the slot.
- Hook in place to hang your garment.